| S.S AISI 304 (Deep Drawn) |
| Alluminium Pressure Die Cast |
| Spring Steel (IS 4454 Gr II) |
| 1/4" BSP (NPT On Request) |
| 3.5 to 7 Bar |
| Naylon |
| 350 to 650 Cycles/ Hr. |
| Dry Lubricated Air/ Inner Gases |
| Buna Nitrile |
|
| Size |
1/4" To 4" Screwed/ Flanged / Triclover |
| Body & Bonnet |
ASTM A351 Gr. CF8/ CF8M / CF3M |
| Stem Packing |
Self Adjusting, Spring Loaded Teflon Packing |
| Trim / Spindle |
Stainless Steel 304 / 316 / 316 L |
| Seat |
Soft Seated Telfon Backed by EPDM. Optional -VITON / EPDM, Buna Nitrile |
| gland Packing |
Teflon 'V' seals, backed by graphite wiper seal |
| Body Test Pressure |
24 Bar Maximum |
| Working Fluid Pressure |
Refer to table |
| Leakage |
As per ANSI B 16. 104 - 1976 Teflon seating Class IV for other
Soft seating Class VI Drop Tight / Bubble Tight |
| Working Temp. |
On Steam - continuous 155oC, Intermittent 180oC with teflon Seating,
Buna Nitrile 80oC, EPDM 135oC, VITION 180o C |
|